[1058] | 1 | # This document is a how-to for installing a Fedora scripts.mit.edu server. |
---|
[181] | 2 | |
---|
[1063] | 3 | set -e -x |
---|
| 4 | |
---|
| 5 | [ -e /scripts-boot-count ] || echo 0 > /scripts-boot-count |
---|
| 6 | |
---|
[1620] | 7 | # This is actually just "pick an active scripts server" |
---|
| 8 | source_server="cats-whiskers.mit.edu" |
---|
[1063] | 9 | |
---|
| 10 | boot=${1:$(cat /scripts-boot-count)} |
---|
| 11 | |
---|
[1619] | 12 | # XXX: let 'branch' be the current svn branch you are on. You want to |
---|
| 13 | # use trunk if your just installing a new server, and branches/fcXX-dev |
---|
| 14 | # if your preparing a server on a new Fedora release. |
---|
[1259] | 15 | |
---|
[1063] | 16 | doreboot() { |
---|
| 17 | echo $(( $boot + 1 )) > /scripts-boot-count; |
---|
| 18 | shutdown -r now "Rebooting for step $(cat /scripts-boot-count)" |
---|
| 19 | } |
---|
| 20 | |
---|
| 21 | YUM() { |
---|
| 22 | NSS_NONLOCAL_IGNORE=1 yum "$@" |
---|
| 23 | } |
---|
| 24 | |
---|
[1058] | 25 | # Helper files for the install are located in server/fedora/config. |
---|
[861] | 26 | |
---|
[1058] | 27 | # Start with a normal install of Fedora. |
---|
[861] | 28 | |
---|
[1645] | 29 | # Take updates |
---|
| 30 | YUM update |
---|
| 31 | |
---|
[1063] | 32 | if [ $boot = 0 ]; then |
---|
[1058] | 33 | # When the initial configuration screen comes up, under "Firewall |
---|
| 34 | # configuration", disable the firewall, and under "System services", leave |
---|
| 35 | # enabled (as of Fedora 9) acpid, anacron, atd, cpuspeed, crond, |
---|
| 36 | # firstboot, fuse, haldaemon, ip6tables, iptables, irqbalance, |
---|
| 37 | # kerneloops, mdmonitor, messagebus, microcode_ctl, netfs, network, nscd, ntpd, |
---|
| 38 | # sshd, udev-post, and nothing else. |
---|
[1619] | 39 | |
---|
| 40 | # If you did a minimal install, these won't be installed, so you'll |
---|
| 41 | # need to do this step later in the process. |
---|
[1063] | 42 | echo "--disabled" > /etc/sysconfig/system-config-firewall |
---|
[1382] | 43 | for i in NetworkManager avahi-daemon bluetooth cups isdn nfslock nfs pcscd restorecond rpcbind rpcgssd rpcidmapd sendmail; do |
---|
[1063] | 44 | chkconfig "$i" off |
---|
| 45 | done |
---|
[1056] | 46 | |
---|
[1381] | 47 | # Turn on network, so we can connect at boot |
---|
| 48 | chkconfig network on |
---|
| 49 | |
---|
[1058] | 50 | # Edit /etc/selinux/config so it has SELINUX=disabled and reboot. |
---|
[1063] | 51 | sed -i 's/^SELINUX=.*/SELINUX=disabled/' /etc/selinux/config |
---|
| 52 | doreboot |
---|
| 53 | fi |
---|
[861] | 54 | |
---|
[1063] | 55 | if [ $boot = 1 ]; then |
---|
| 56 | # Create a scripts-build user account, and set up rpm to build in |
---|
| 57 | # $HOME by doing a |
---|
| 58 | # cp config/home/scripts-build/.rpmmacros /home/scripts-build/ |
---|
| 59 | # (If you just use the default setup, it will generate packages |
---|
| 60 | # in /usr/src/redhat.) |
---|
| 61 | adduser scripts-build |
---|
| 62 | |
---|
[1058] | 63 | # Check out the scripts.mit.edu svn repository. Configure svn not to cache |
---|
| 64 | # credentials. |
---|
[387] | 65 | |
---|
[1063] | 66 | YUM install -y subversion |
---|
| 67 | |
---|
| 68 | cd /srv |
---|
[1620] | 69 | # We must use an explicit source_server while setting up the Scripts |
---|
| 70 | # server, because once we load the Scripts /etc configuration, |
---|
| 71 | # scripts.mit.edu will start resolving to localhost and |
---|
| 72 | # updates/commits will stop working. This will be switched to |
---|
| 73 | # scripts.mit.edu at the end of the install process. |
---|
| 74 | svn co svn://$source_server/$branch repository |
---|
[1063] | 75 | |
---|
[1645] | 76 | # XXX These sed scripts don't work |
---|
[1063] | 77 | sed -i 's/^(# *)*store-passwords.*/store-passwords = no/' /root/.subversion/config |
---|
| 78 | sed -i 's/^(# *)*store-auth-creds.*/store-auth-creds = no/' /root/.subversion/config |
---|
[1237] | 79 | # The same tweaks should be made on /home/scripts-build/.subversion/config |
---|
| 80 | # once it exists (do something with svn as scripts-build) |
---|
[1063] | 81 | |
---|
| 82 | chown -R scripts-build /srv/repository |
---|
| 83 | |
---|
[1058] | 84 | # cd to server/fedora in the svn repository. |
---|
[1063] | 85 | cd /srv/repository/server/fedora |
---|
[387] | 86 | |
---|
[1058] | 87 | # Run "make install-deps" to install various prereqs. Nonstandard |
---|
| 88 | # deps are in /mit/scripts/rpm. |
---|
[1259] | 89 | YUM install -y make |
---|
[1063] | 90 | make install-deps |
---|
[1619] | 91 | # You should pay close attention to the output of this command, and |
---|
| 92 | # note if packages you think should exist don't exist anymore. In |
---|
| 93 | # particular, if Fedora changes an architecture designation those |
---|
| 94 | # won't work. |
---|
[387] | 95 | |
---|
[1645] | 96 | # Get some packages necessary for OpenAFS |
---|
| 97 | YUM install -y redhat-lsb |
---|
| 98 | YUM install -y autofs |
---|
| 99 | |
---|
[1619] | 100 | # Add scripts-build to the group 'mock' |
---|
| 101 | usermod -a -G mock scripts-build |
---|
| 102 | |
---|
[1063] | 103 | # Install bind |
---|
| 104 | YUM install -y bind |
---|
[934] | 105 | |
---|
[1063] | 106 | # Check out the scripts /etc configuration |
---|
| 107 | cd /root |
---|
[1259] | 108 | svn co svn://scripts.mit.edu/$branch/server/fedora/config/etc etc |
---|
| 109 | # backslash to make us not use the alias |
---|
[1063] | 110 | \cp -a etc / |
---|
[785] | 111 | |
---|
[1381] | 112 | # NOTE: You will have just lost DNS resolution and the ability |
---|
| 113 | # to do password SSH in. If you managed to botch this step without |
---|
| 114 | # having named setup, you can do a quick fix by frobbing /etc/resolv.conf |
---|
| 115 | # with a non 127.0.0.1 address for the DNS server. Be sure to revert it once |
---|
| 116 | # you have named. |
---|
[1259] | 117 | |
---|
[1619] | 118 | # You can get password SSH back by editing /etc/ssh/sshd_config (allow |
---|
| 119 | # password auth) and /etc/pam.d/sshd (comment out the first three auth |
---|
[1645] | 120 | # lines). However, you can also temporarily install krb5 and setup the |
---|
| 121 | # keytabs and k5login to get Kerberized authentication. |
---|
[1619] | 122 | |
---|
[1259] | 123 | service named start |
---|
| 124 | chkconfig named on |
---|
| 125 | |
---|
[1619] | 126 | # This is the point at which you should start updating scriptsified |
---|
| 127 | # packages for a new Fedora release. Consult 'upgrade-tips' for more |
---|
| 128 | # information. |
---|
| 129 | |
---|
[1058] | 130 | # env NSS_NONLOCAL_IGNORE=1 yum install scripts-base |
---|
[1063] | 131 | YUM install -y scripts-base |
---|
[387] | 132 | |
---|
[1058] | 133 | # Remember to set NSS_NONLOCAL_IGNORE=1 anytime you're setting up |
---|
| 134 | # anything, e.g. using yum. Otherwise useradd will query LDAP in a stupid way |
---|
[1259] | 135 | # that makes it hang forever. (This is why we're using YUM, not yum) |
---|
[881] | 136 | |
---|
[1058] | 137 | # Reload the iptables config to take down the restrictive firewall |
---|
[1259] | 138 | service iptables restart |
---|
[862] | 139 | |
---|
[1058] | 140 | # Copy over root's dotfiles from one of the other machines. |
---|
[1259] | 141 | # Perhaps a useful change is to remove the default aliases |
---|
| 142 | # On 2009-07-01, the dotfiles to transfer where: |
---|
[1381] | 143 | # .bashrc .ldapvirc (<- HAS PRIVILEDGED DATA) |
---|
| 144 | # .screenrc .ssh (<- directory) .vimrc |
---|
[1259] | 145 | # Trying to scp from server to server won't work, as scp |
---|
| 146 | # will attempt to negotiate a server-to-server connection. |
---|
| 147 | # Instead, scp to your trusted machine as a temporary file, |
---|
| 148 | # and then push to the other server |
---|
[1381] | 149 | # You'll need some way to authenticate to the server, and since |
---|
| 150 | # password logins are disabled, you'll need some way of |
---|
| 151 | # temporarily giving yourself credentials. On a test server, |
---|
| 152 | # reenabling password authentication is ok: frob /etc/pam.d/sshd |
---|
| 153 | # and reverse apply r1068. |
---|
[803] | 154 | |
---|
[1058] | 155 | # Replace rsyslog with syslog-ng by doing: |
---|
[1259] | 156 | rpm -e --nodeps rsyslog |
---|
| 157 | YUM install -y syslog-ng |
---|
| 158 | chkconfig syslog-ng on |
---|
[861] | 159 | |
---|
[1259] | 160 | # Install various dependencies of the scripts system, including |
---|
| 161 | # glibc-devel.i586 (ezyang: already installed for me), |
---|
| 162 | # python-twisted-core (ditto), mod_fcgid, nrpe, nagios-plugins-all. |
---|
| 163 | YUM install -y mod_fcgid |
---|
| 164 | YUM install -y nrpe |
---|
| 165 | YUM install -y nagios-plugins-all |
---|
[1645] | 166 | YUM install -y fprintd-pam |
---|
[788] | 167 | |
---|
[1058] | 168 | # Disable NetworkManager with chkconfig NetworkManager off. Configure |
---|
| 169 | # networking on the front end and back end, and the routing table to send |
---|
| 170 | # traffic over the back end. Make sure that chkconfig reports "network" on, so |
---|
| 171 | # that the network will still be configured at next boot. |
---|
[1259] | 172 | # ezyang: For me, NetworkManager was not installed at this point, and |
---|
| 173 | # we had already done the basic config for networking front end and |
---|
| 174 | # back end (because I wanted ssh access, and not just conserver access) |
---|
[788] | 175 | |
---|
[1058] | 176 | # Fix the openafs /usr/vice/etc <-> /etc/openafs mapping by changing |
---|
| 177 | # /usr/vice/etc/cacheinfo to contain: |
---|
| 178 | # /afs:/usr/vice/cache:10000000 |
---|
[1178] | 179 | # Also fix ThisCell to contain athena.mit.edu in both directories |
---|
[1382] | 180 | # WARNING: if you're installing a test server, this needs to be much |
---|
| 181 | # smaller; the max filesize on XVM is 10GB. Pick something like |
---|
| 182 | # 500000 |
---|
[1259] | 183 | echo "/afs:/usr/vice/cache:10000000" > /usr/vice/etc/cacheinfo |
---|
| 184 | # ezyang: ThisCell on b-k and c-w don't have anything special |
---|
| 185 | # written here |
---|
[1382] | 186 | # If you're making a test server, some of the AFS parameters are |
---|
| 187 | # kind of retarded (and if you're low on disk space, will actually |
---|
| 188 | # exhaust our inodes). |
---|
| 189 | # Edit the parameters in /etc/sysconfig/openafs |
---|
[788] | 190 | |
---|
[1645] | 191 | # Test that zephyr is working |
---|
| 192 | chkconfig zhm on |
---|
| 193 | service zhm start |
---|
| 194 | echo 'Test!' | zwrite -d -c scripts -i test |
---|
[861] | 195 | |
---|
[1178] | 196 | # Install the athena-base, athena-lprng, and athena-lprng-misc RPMs |
---|
| 197 | # from the Athena 9 build (these are present in our yum repo). Note |
---|
| 198 | # that you will have to use --nodeps for at least one of the lprng |
---|
| 199 | # ones because it thinks it needs the Athena hesiod RPM. It doesn't |
---|
| 200 | # really. Before doing this, run it without --nodeps and arrange to |
---|
| 201 | # install the rest of the things it really does depend on. This will |
---|
| 202 | # include a bunch of 32-bit rpms; go ahead and install the .i586 versions |
---|
[1259] | 203 | # of them. |
---|
| 204 | YUM install -y athena-base |
---|
| 205 | YUM install -y athena-lprng |
---|
| 206 | yumdownloader athena-lprng-misc |
---|
| 207 | # ezyang: I couldn't find any deps for this that existed in the repos |
---|
| 208 | # You might get a "find: `/usr/athena/info': No such file or directory" |
---|
| 209 | # error; this is fine |
---|
| 210 | rpm -i --nodeps athena-lprng-misc-9.4-0.i386.rpm |
---|
[1178] | 211 | |
---|
[1058] | 212 | # Install the full list of RPMs that users expect to be on the |
---|
[1259] | 213 | # scripts.mit.edu servers. |
---|
[387] | 214 | |
---|
[1259] | 215 | # on another server, run: |
---|
| 216 | rpm -qa --queryformat "%{Name}.%{Arch}\n" | sort > packages.txt |
---|
| 217 | # arrange for packages.txt to be passed to the server, then run: |
---|
| 218 | # notice that yum is not capitalized |
---|
| 219 | # Also notice skip-broken |
---|
| 220 | cat packages.txt | NSS_NONLOCAL_IGNORE=1 xargs yum install -y --skip-broken |
---|
| 221 | |
---|
[1190] | 222 | # Check which packages are installed on your new server that are not |
---|
| 223 | # in the snapshot, and remove ones that aren't needed for some reason |
---|
| 224 | # on the new machine. Otherwise, aside from bloat, you may end up |
---|
| 225 | # with undesirable things for security, like sendmail. |
---|
[1259] | 226 | rpm -qa --queryformat "%{Name}.%{Arch}\n" | sort > newpackages.txt |
---|
| 227 | diff -u packages.txt newpackages.txt | less |
---|
| 228 | # if all went well, you'll probably see multiple kernel versions |
---|
| 229 | # as the only diff |
---|
| 230 | # ezyang: I got exim installed as another package |
---|
[1382] | 231 | # here's a cute script that removes all extra packages |
---|
| 232 | diff -u packages.txt newpackages.txt | grep '+' | cut -c2- | grep -v "@" | grep -v "++" | xargs yum erase -y |
---|
[1190] | 233 | |
---|
[1237] | 234 | # Check out the scripts /usr/vice/etc configuration |
---|
| 235 | cd /root |
---|
| 236 | mkdir vice |
---|
| 237 | cd vice |
---|
[1645] | 238 | svn co svn://scripts.mit.edu/$branch/server/fedora/config/usr/vice/etc etc |
---|
[1237] | 239 | \cp -a etc /usr/vice |
---|
| 240 | |
---|
[1058] | 241 | # Install the full list of perl modules that users expect to be on the |
---|
[1108] | 242 | # scripts.mit.edu servers. |
---|
[1058] | 243 | # - export PERL_MM_USE_DEFAULT=1 |
---|
| 244 | # - Run 'cpan', accept the default configuration, and do 'o conf |
---|
| 245 | # prerequisites_policy follow'. |
---|
| 246 | # - Parse the output of perldoc -u perllocal | grep head2 on an existing |
---|
| 247 | # server, and "notest install" them from the cpan prompt. |
---|
[1109] | 248 | # TO DO THIS: |
---|
| 249 | # On another server, run: |
---|
[1178] | 250 | # perldoc -u perllocal | grep head2 | cut -f 3 -d '<' | cut -f 1 -d '|' | sort -u | perl -ne 'chomp; print "notest install $_\n" if system("rpm -q --whatprovides \"perl($_)\" >/dev/null 2>/dev/null")' > /mit/scripts/config/perl-packages.txt |
---|
[1109] | 251 | # Then on the server you're installing, |
---|
[1190] | 252 | # cat perl-packages.txt | perl -MCPAN -e shell |
---|
[1259] | 253 | export PERL_MM_USE_DEFAULT=1 |
---|
| 254 | # XXX: Some interactive gobbeldygook |
---|
| 255 | cpan |
---|
| 256 | o conf prerequisites_policy follow |
---|
| 257 | o conf commit |
---|
| 258 | # on a reference server |
---|
| 259 | perldoc -u perllocal | grep head2 | cut -f 3 -d '<' | cut -f 1 -d '|' | sort -u | perl -ne 'chomp; print "notest install $_\n" if system("rpm -q --whatprovides \"perl($_)\" >/dev/null 2>/dev/null")' > perl-packages.txt |
---|
| 260 | # arrange for perl-packages.txt to be transferred to server |
---|
| 261 | cat perl-packages.txt | perl -MCPAN -e shell |
---|
[812] | 262 | |
---|
[1058] | 263 | # Install the Python eggs and Ruby gems and PEAR/PECL doohickeys that are on |
---|
| 264 | # the other scripts.mit.edu servers and do not have RPMs. |
---|
[1259] | 265 | # The general mode of operation will be to run the "list" command |
---|
| 266 | # on both servers, see what the differences are, check if those diffs |
---|
| 267 | # are packaged up as rpms, and install them (rpm if possible, native otherwise) |
---|
[1178] | 268 | # - Look at /usr/lib/python2.6/site-packages and |
---|
| 269 | # /usr/lib64/python2.6/site-packages for Python eggs and modules. |
---|
[1259] | 270 | # There will be a lot of gunk that was installed from packages; |
---|
| 271 | # easy-install.pth will tell you what was easy_installed. |
---|
[1178] | 272 | # First use 'yum search' to see if the relevant package is now available |
---|
| 273 | # as an RPM, and install that if it is. If not, then use easy_install. |
---|
[1432] | 274 | # Pass -Z to easy_install to install them unzipped, as some zipped eggs |
---|
| 275 | # want to be able to write to ~/.python-eggs. (Also makes sourcediving |
---|
| 276 | # easier.) |
---|
[1058] | 277 | # - Look at `gem list` for Ruby gems. |
---|
[1178] | 278 | # Again, use 'yum search' and prefer RPMs, but failing that, 'gem install'. |
---|
[1259] | 279 | # ezyang: rspec-rails depends on rspec, and will override the Yum |
---|
| 280 | # package, so... don't use that RPM yet |
---|
[1058] | 281 | # - Look at `pear list` for Pear fruits (or whatever they're called). |
---|
[1178] | 282 | # Yet again, 'yum search' for RPMs before resorting to 'pear install'. Note |
---|
| 283 | # that for things in the beta repo, you'll need 'pear install package-beta'. |
---|
[1259] | 284 | # (you might get complaints about the php_scripts module; ignore them) |
---|
[1190] | 285 | # - Look at `pecl list` for PECL things. 'yum search', and if you must, |
---|
[1462] | 286 | # 'pecl install' needed items. If it doesn't work, try 'pear install |
---|
[1544] | 287 | # pecl/foo' or 'pecl install foo-beta' or those two combined. |
---|
[1259] | 288 | # Automating this... will require a lot of batonning between |
---|
| 289 | # the servers. Probably best way to do it is to write an actual |
---|
| 290 | # script. |
---|
[785] | 291 | |
---|
[1259] | 292 | # Setup some Python config |
---|
| 293 | echo 'import site, os.path; site.addsitedir(os.path.expanduser("~/lib/python2.6/site-packages"))' > /usr/lib/python2.6/site-packages/00scripts-home.pth |
---|
[812] | 294 | |
---|
[1645] | 295 | # Install the credentials. There are a lot of things to remember here. |
---|
| 296 | # Be sure to make sure the permissions match up (ls -l on an existing |
---|
| 297 | # server!). |
---|
[1259] | 298 | # o This will be different if you're setting up our build/update server. |
---|
[1178] | 299 | # o You probably installed the machine keytab long ago |
---|
[1259] | 300 | ls -l /etc/krb5.keytab |
---|
[1645] | 301 | # Use ktutil to combine the host/scripts.mit.edu and |
---|
[1178] | 302 | # host/scripts-vhosts.mit.edu keys with host/this-server.mit.edu in |
---|
| 303 | # the keytab. Do not use 'k5srvutil change' on the combined keytab |
---|
[1645] | 304 | # or you'll break the other servers. (real servers only). Be |
---|
| 305 | # careful about writing out the keytab: if you write it to an |
---|
| 306 | # existing file the keys will just get appended |
---|
[1178] | 307 | # o The daemon.scripts keytab |
---|
[1259] | 308 | ls -l /etc/daemon.keytab |
---|
| 309 | # o The SSL cert private key (real servers only) |
---|
[1645] | 310 | ls -l /etc/pki/tls/private/scripts.key |
---|
[1259] | 311 | # o The LDAP password for the signup process (real servers only) |
---|
[1645] | 312 | ls -l /etc/signup-ldap-pw |
---|
| 313 | # o The SQL password for the signup process (real servers only) (you |
---|
| 314 | # only need one) |
---|
| 315 | ls -l /usr/local/etc/sql-mit-edu.cfg.php |
---|
| 316 | ls -l /etc/sql-mit-edu.cfg.php |
---|
[1320] | 317 | # o The whoisd password (real servers only) |
---|
[1645] | 318 | # o The LDAP keytab for this server, which will be used later (real |
---|
| 319 | # servers only). |
---|
| 320 | ls -l /etc/dirsrv/keytab |
---|
[1259] | 321 | # o Replace the ssh host keys with the ones common to all scripts servers (real servers only) |
---|
[1645] | 322 | ls -l /etc/ssh/*key* |
---|
[1178] | 323 | # o Make sure root's .k5login is correct |
---|
[1259] | 324 | cat /root/.k5login |
---|
| 325 | # o Make sure logview's .k5login is correct (real servers only) |
---|
[1645] | 326 | cat /home/logview/.k5login |
---|
[387] | 327 | |
---|
[1058] | 328 | # If you are setting up a test server, pay attention to |
---|
| 329 | # /etc/sysconfig/network-scripts and do not bind scripts' IP address. |
---|
[1259] | 330 | # You will also need to modify: |
---|
| 331 | # o /etc/ldap.conf |
---|
| 332 | # add: host scripts.mit.edu |
---|
| 333 | # o /etc/nss-ldapd.conf |
---|
| 334 | # replace: uri ***** |
---|
| 335 | # with: uri ldap://scripts.mit.edu/ |
---|
| 336 | # o /etc/openldap/ldap.conf |
---|
| 337 | # add: URI ldap://scripts.mit.edu/ |
---|
| 338 | # BASE dc=scripts,dc=mit,dc=edu |
---|
| 339 | # o /etc/httpd/conf.d/vhost_ldap.conf |
---|
| 340 | # replace: VhostLDAPUrl **** |
---|
| 341 | # with: VhostLDAPUrl "ldap://scripts.mit.edu/ou=VirtualHosts,dc=scripts,dc=mit,dc=edu" |
---|
[1450] | 342 | # o /etc/postfix/virtual-alias-{domains,maps}-ldap.cf |
---|
| 343 | # replace: server_host ***** |
---|
| 344 | # with: server_host = ldap://scripts.mit.edu |
---|
[1259] | 345 | # to use scripts.mit.edu instead of localhost. |
---|
| 346 | # XXX: someone should write sed scripts to do this |
---|
[562] | 347 | |
---|
[1259] | 348 | # If you are setting up a test server, afsagent's cronjob will attempt |
---|
| 349 | # to be renewing with the wrong credentials (daemon.scripts). Change this: |
---|
| 350 | vim /home/afsagent/renew # replace all mentions of daemon.scripts.mit.edu |
---|
| 351 | |
---|
[1645] | 352 | # Install 389-ds-base and set up replication (see ./HOWTO-SETUP-LDAP). |
---|
[785] | 353 | |
---|
[1058] | 354 | # Make the services dirsrv, nslcd, nscd, postfix, and httpd start at |
---|
| 355 | # boot. Run chkconfig to make sure the set of services to be run is |
---|
| 356 | # correct. |
---|
[1259] | 357 | chkconfig dirsrv on |
---|
| 358 | chkconfig nslcd on |
---|
| 359 | chkconfig nscd on |
---|
| 360 | chkconfig postfix on |
---|
| 361 | chkconfig httpd on |
---|
[818] | 362 | |
---|
[1259] | 363 | # Postfix doesn't actually deliver mail; fix this |
---|
| 364 | cd /etc/postfix |
---|
| 365 | postmap virtual |
---|
[1178] | 366 | |
---|
[1451] | 367 | # Munin might not be monitoring packages that were installed after it |
---|
| 368 | munin-node-configure --suggest --shell | sh |
---|
| 369 | |
---|
[1058] | 370 | # Run fmtutil-sys --all, which does something that makes TeX work. |
---|
[1259] | 371 | fmtutil-sys --all |
---|
| 372 | # ezyang: I got errors on xetex |
---|
[803] | 373 | |
---|
[1058] | 374 | # Ensure that PHP isn't broken: |
---|
[1259] | 375 | mkdir /tmp/sessions |
---|
| 376 | chmod 01777 /tmp/sessions |
---|
[954] | 377 | |
---|
[1481] | 378 | # Ensure fcgid isn't broken |
---|
[1482] | 379 | chmod 755 /var/run/mod_fcgid # ezyang: I suspect this is no longer necessary |
---|
[1259] | 380 | |
---|
| 381 | # Fix etc by making sure none of our config files got overwritten |
---|
| 382 | cd /etc |
---|
| 383 | svn status | grep M |
---|
[1382] | 384 | # ezyang: I had to revert krb5.conf (not with latest), nsswitch.conf and sysconfig/openafs |
---|
[1259] | 385 | |
---|
[1382] | 386 | # ThisCell got clobbered, replace it with athena.mit.edu |
---|
| 387 | echo "athena.mit.edu" > /usr/vice/etc/ThisCell |
---|
| 388 | |
---|
[1058] | 389 | # Reboot the machine to restore a consistent state, in case you |
---|
| 390 | # changed anything. |
---|
[1259] | 391 | # ezyang: When I rebooted, the following things happened: |
---|
| 392 | # o Starting kdump failed (this is ok) |
---|
| 393 | # o postfix mailbombed us |
---|
| 394 | # o firstboot configuration screen popped up (ignored; manually will do |
---|
| 395 | # chkconfig after the fact) |
---|
[875] | 396 | |
---|
[1058] | 397 | # (Optional) Beat your head against a wall. |
---|
[562] | 398 | |
---|
[1058] | 399 | # Possibly perform other steps that I've neglected to put in this |
---|
| 400 | # document. |
---|
[1259] | 401 | # o For some reason, syslog-ng wasn't turning on automatically, so we weren't |
---|
| 402 | # getting spew |
---|
| 403 | |
---|
| 404 | # Some info about changing hostnames: it appears to be in: |
---|
| 405 | # o /etc/sysconfig/network |
---|
| 406 | # o your lvm thingies; probably don't need to edit |
---|
[1382] | 407 | |
---|
| 408 | # More stuff for test servers |
---|
| 409 | # - You need a self-signed SSL cert. Generate with: |
---|
| 410 | openssl req -new -x509 -keyout /etc/pki/tls/private/scripts.key -out /etc/pki/tls/certs/scripts.cert -nodes |
---|
| 411 | # Also make /etc/pki/tls/certs/ca.pem match up |
---|
| 412 | # - Make (/etc/aliases) root mail go to /dev/null, so we don't spam people |
---|
| 413 | # - Edit /etc/httpd/conf.d/scripts-vhost-names.conf to have scripts-fX-test.xvm.mit.edu |
---|
| 414 | # be an accepted vhost name |
---|
| 415 | # - Look at the old test server and see what config changes are floating around |
---|
[1620] | 416 | |
---|
| 417 | # XXX: our SVN checkout should be updated to use scripts.mit.edu |
---|
[1645] | 418 | # (repository and etc) once serving actually works. |
---|